adjustable wall lamp

Walnut Telescopic Wall Lamp: Adjustable Plug-In Sconce Guide

  • By LAMPCOZY
  • 6 min read
Walnut telescopic wall lamp with white ceramic shade

The Walnut Telescopic Wall Lamp is a plug-in wall sconce with a wooden extendable arm and a white ceramic shade. The arm reaches up to 59 cm (23.2 in) from the wall, so you can pull the light over a bed, sofa or reading chair and fold it back flat when it is not in use. It is sold as a set of two, with a single-unit option also available.

It solves a very specific problem: you want directional, switch-controlled light exactly where you sit or read, but you do not want to open a wall or hire an electrician. The fixture runs on a 150 cm (59 in) cord with an integrated switch plug, so a standard outlet is the only requirement.

View the Walnut Telescopic Wall Lamp →

What It Is and Who It Suits

This is a wall-mounted reading and ambient light with three defining traits: a telescopic (pantograph) wooden arm, a folded ceramic shade, and plug-in power. That combination suits:

  • Renters and apartment dwellers who cannot add a switched wall circuit.
  • Bedrooms where two matching sconces should replace cluttered table lamps on the nightstands.
  • Reading corners that need light aimed at the page rather than the whole room.
  • Living rooms and hallways where you want an adjustable accent rather than a fixed pendant.

It is an indoor fixture with an IP20 rating, so it belongs in dry rooms — bedrooms, living rooms, studies, hallways — not bathrooms, covered porches or anywhere it will meet moisture.

Design and Materials

The body is built from wood, metal and ceramic. The finish is described as a wooden finish with a white shade, produced through electroplating, cutting and sanding processes. The ceramic shade is circular with regular, precise folds — a surface treatment used to spread light evenly instead of concentrating it in one hot spot.

Visually, the combination reads warm rather than glossy: wood grain at the arm, a matte-white ceramic shade, and a slim metal joint at the pivot. That is why it fits Scandinavian, Japandi, mid-century and modern-traditional rooms without needing to match a specific palette.

Walnut telescopic wall lamp with white ceramic shade

How the Telescopic Arm Works

The arm uses a pantograph mechanism — the same folding geometry as a drafting lamp. You extend or retract it to change both the reach and the height of the shade, then the friction joints hold the position. Extended, the fixture projects up to 59 cm / 23.2 in from the wall; retracted, it folds close to the wall and the overall height is about 24 cm / 9.4 in.

Practical consequence worth planning for: because the arm both reaches out and drops down, the wall plate sits higher than the shade. Mount the plate with the arm's travel in mind, not just the final shade position — details in the next section.

Switching is on the cord, via the integrated push-button plug, not on the fixture itself. In a bedroom that is usually an advantage: the switch lands at mattress height near the outlet instead of above your head.

Sizing, Placement and Installation

These are starting points, not rules — adjust for your ceiling height, mattress height and how you actually read.

Application Suggested height Notes
Bedside, over a nightstand Shade center 50–60 cm (20–24 in) above the nightstand top Keep the wall plate higher and let the arm angle down so light falls on the page, not into your eyes
Living room, beside a sofa Shade 90–107 cm (36–42 in) above the floor Roughly at seated shoulder height for reading
Hallway or artwork accent Center 152–168 cm (60–66 in) above the floor Angle the shade toward the wall for a wash of light
Pair flanking a bed Base 20–35 cm (8–14 in) outside each mattress edge Keeps the extended arm over the mattress without crowding the sleeper

Three more installation points:

  • Spacing a pair: measure your bed width, add 40–70 cm (16–28 in), and split the difference evenly. Symmetry matters more than an exact number.
  • Plan around the cord: each fixture has a 150 cm / 59 in cord with a switch plug. If the nearest outlet is further away, decide on an extension cord or a cord-cover channel before you drill.
  • Fix into solid material: it is a 3 kg / 6.6 lb fixture, so anchor the plate into studs or use appropriate wall anchors for drywall. Never hang it from plaster alone.

Wooden telescopic arm of the walnut wall lamp

Bulbs, Color Temperature and Dimming

The socket accepts E26 or E27 bulbs, LED or Edison style, with a maximum of 40W. Voltage is AC 110–240V and no driver is required, so you can fit a standard bulb you already own.

Room and task Color temperature Suggested output (LED)
Bedroom, pre-sleep reading 2700K warm white 450–600 lumens
Living room, general reading 2700–3000K 600–800 lumens
Study or hallway task light 3000–3500K 800 lumens, still within 40W

Dimming: the fixture supports dimming when paired with a compatible dimmable bulb. The default bulb included with the lamp is not dimmable, so if dimming matters, plan on swapping the bulb. And because the switch is a push-button on the plug rather than a dimmer, real dimming needs a dimmable bulb on a dimmable circuit or smart plug.

One practical note on the ceramic shade: it diffuses light, which makes glare softer but also reduces the punch of a very bright bulb. If you read small print, choose a slightly higher lumen output rather than a higher color temperature — warmer and brighter beats colder and harsher at night.

Where It Works Best

  • Bedroom: the strongest use case. Two units replace nightstand lamps, free up surface space, and put light on the page.
  • Living room: set beside a sofa or armchair as a directed reading light that does not need a floor lamp footprint.
  • Reading nook or home office: the arm lets you shift light between a book, a keyboard and the wall behind it.
  • Hallway or stair landing: folded tight, it reads as a sculptural wall detail rather than a utility light.

White ceramic shade on the walnut telescopic wall lamp

Plug-In vs Hardwired vs Table Lamp

This plug-in sconce Hardwired sconce Table lamp
Installation Wall fixings only; plugs into an outlet Requires an electrician and a wall circuit None
Rental friendly Yes No Yes
Visible cord Yes, 150 cm / 59 in No Yes
Frees surface space Yes Yes No
Adjustable reach Yes, telescopic arm Rarely Angle only
Best for Rentals, retrofits, bedside pairs New builds and renovations Temporary or surface-limited setups

If you are renovating and can add a switched circuit, a hardwired sconce is the cleaner long-term answer. If the wall is finished and the outlet is already there, this fixture gets you 90% of the result in twenty minutes.

Specifications

Product size L 59 cm x H 24 cm / 23.2 in x 9.4 in
Materials Wood, metal, ceramic
Shade White ceramic, folded surface
Light source LED or Edison bulb
Socket E26 or E27
Max power 40W
Voltage AC 110–240V
Control Push-button switch on the plug
Dimming With a compatible dimmable bulb (included bulb is not dimmable)
Wire 150 cm / 59 in with integrated switch plug
Plug options US, UK, AU, EU
Mounting Wall, indoor
IP rating IP20
Battery / driver No battery, no driver required
Weight 3 kg / 6.6 lb

Per the product listing, the fixture is described as UL certified, ETL listed, and CE, RoHS and FCC compliant. Configurations are a single lamp or a set of two, with US, UK, AU or EU plug.

Shop Now — see sizes, plugs and pricing →

Frequently Asked Questions

Does it need to be wired into the wall?

No. It is a plug-in fixture: a 150 cm / 59 in cord with an integrated switch plug goes straight into a standard outlet. You mount the wall plate, hang the lamp, and plug it in.

What bulb should I use?

Any E26 or E27 LED or Edison bulb up to 40W. For a bedroom, 2700K at roughly 450–600 lumens is a comfortable starting point; for reading, go to 600–800 lumens.

Can it be dimmed?

Yes, if you fit a compatible dimmable bulb. The bulb included by default is not dimmable, and the lamp's switch is a push-button rather than a dimmer, so plan on a dimmable bulb plus a dimmable circuit or smart plug.

How far does the arm reach?

Up to 59 cm / 23.2 in from the wall, and it folds back close to the wall when retracted. Plan the wall plate position around the arm's downward travel, not just the final shade height.

Can I use it in a bathroom or outdoors?

No. The IP20 rating is for dry indoor spaces. Use it in bedrooms, living rooms, studies and hallways.

Single lamp or set of two?

Both exist. A pair is the natural choice for flanking a bed or a sofa; a single unit works for a reading chair or a hallway accent.

Walnut telescopic wall lamp with adjustable arm

If you are lighting a bedroom or a reading corner and the outlet is already on the wall, this is one of the lower-effort upgrades you can make: no wiring, adjustable aim, and a shade that softens the light instead of blasting it. Discover the Walnut Telescopic Wall Lamp →

Le Journal

Plus d'histoires sur l'éclairage

◆ Black Friday Edit

Tiered Savings

Code COZYBF

Buy 2: 12% OFF (COZYBF12)Buy 3+: 15% OFF (COZYBF15)

Enter code at checkout · Ends Nov 28, 11:59 PM ET

Ajouter une note à votre commande
Add A Coupon

Effectuez une recherche

Tendances  Albâtre  Travertin  Lustre en laiton  Suspension d'îlot de cuisine  Applique murale  Lampe de table en céramique  Rotin  Wabi-Sabi  

Popular Products