Brass Crystal Pendant Light for Entryway & Dining Room

A tiered brass-and-crystal pendant light that anchors an entryway or dining room with layered, reflective warmth. If you're finishing a foyer, stairwell, or dining area and want a fixture that reads elegant without feeling heavy, this indoor ceiling pendant pairs a polished brass frame with clear crystal accents suspended in cascading tiers. It suits homeowners and interior designers who want a classic-yet-contemporary focal point rather than a plain fabric shade, and it's wired for both US (110–120V) and European (220–240V) supply.
Shop the Brass Crystal Tiered Pendant Light →
Design and materials
The fixture is built from brass with a brass finish and clear crystal accents. A ceiling canopy supports a linked chain downrod, which carries several horizontal metal rings; clear crystals hang from those rings in a tiered arrangement. The metalwork is finished through electroplating, polishing, and cutting, giving the piece the classic-yet-contemporary look the listing describes.
Because the crystals are clear rather than amber or tinted, the fixture stays bright and neutral. It settles comfortably into warm wood dining rooms, marble foyers, and modern neutral palettes alike, and the clear crystal lets the brass read as the accent rather than the whole story.
Where this pendant works best
The listing specifies indoor use across entryways, dining rooms, living rooms, and bedrooms. In practice it earns its keep in three spots:
- Entryway or foyer — a single fixture centered in the space gives the room an immediate focal point.
- Dining room — centered over the table, it defines the dining zone and reflects candlelight and tableware.
- Living room or bedroom — a compact statement drop where a full-size chandelier would overwhelm the ceiling height.
Sizing, height and installation
Get the drop right and this fixture looks intentional; get it wrong and even a beautiful pendant feels off. The dimensions from the listing:
- Fixture size: ∅ 10.6″ x H 12.2″ (Dia 27 cm x H 31 cm)
- Hanging chain: 50 cm / 19.7″, adjustable at installation
- Mounting: ceiling · Weight: 4 kg / 8.8 lbs · Environment: indoor
Practical guidelines (general design rules of thumb, not product specs):
- Over a dining table: aim for the bottom of the fixture roughly 30–36″ above the tabletop so sightlines stay open across the table.
- In an entry or foyer: keep at least about 7 ft of clearance from the floor so people pass underneath comfortably.
- Tall ceilings: the included 19.7″ chain is short by design, so on high ceilings you will likely want extra chain or a longer drop — customization is available from the seller, so confirm before ordering.
- Installation: a ceiling junction box and a qualified electrician are recommended.
Specifications
| Size | Dia 27 cm x H 31 cm / ∅ 10.6″ x H 12.2″ |
| Material | Brass, crystal |
| Finish | Brass |
| Crystal colour | Clear |
| Light source | LED bulb or Edison bulb |
| Base type | E14 |
| Power | 15W |
| Voltage | AC 110–240V |
| Mounting | Ceiling |
| Environment | Indoor |
| Weight | 4 kg / 8.8 lbs |
| Hanging chain | 50 cm / 19.7″ (adjustable) |
| Dimming | Bulb-dependent (dimmable bulb + compatible dimmer) |
| Control | Push-button switch |
| Processes | Electroplating, polishing, cutting |
| Battery / driver | No battery; no driver required |
Bulbs, dimming and color temperature
The fixture takes an E14 base bulb — LED or Edison style — rated up to 15W and suitable for AC 110–240V. One base note worth knowing: E14 (14 mm) is the slightly larger European candelabra base, so confirm your bulb matches — it is not the same as the common US E12 candelabra.
Dimming is conditional. The fixture supports dimming only when paired with a dimmable bulb and a compatible dimmer switch. The listing notes the control method is a push-button switch and that the included bulb is not dimmable, so plan to swap in a dimmable E14 LED if you want to dim.
Color temperature guidance: 2700K–3000K warm white suits dining rooms and entryways best, flattering skin tones and wood tones; step toward 3000K if you want the crystal to read a little crisper.
Compliance and certifications
The manufacturer states that this fixture carries UL Certification, ETL Listing, CE approval, RoHS compliance, and FCC certification. For commercial, hospitality, or spec projects, verify the current certificates directly with the seller before you order.
What to confirm before you buy
- Is your ceiling junction box centered where you want the light — over the table, or centered in the foyer?
- Does your ceiling height allow a comfortable finished drop with the included 19.7″ chain?
- Will you dim it? If yes, add a dimmable E14 bulb and a compatible dimmer.
- Is the location indoors and dry?
Discover the Brass Crystal Tiered Pendant Light →
Frequently asked questions
Is this pendant light dimmable?
The fixture supports dimming when paired with a dimmable bulb and a compatible dimmer switch. The included bulb is not dimmable, so you may need to replace it with a dimmable E14 LED bulb to enable this feature.
Can the height be adjusted during installation?
Yes. The hanging chain is 50 cm (19.7″) and can be adjusted during installation to suit your ceiling height and design preference.
What type of bulb does this fixture require?
An E14 base bulb, such as an LED or Edison bulb. The fixture is rated for 15W and operates on AC 110–240V.
What rooms is it best for?
Entryways, dining rooms, living rooms, and bedrooms — indoor use.
Do you offer expedited shipping?
Yes, expedited shipping is available for qualifying orders. For specific timelines and arrangements, contact support.
Ready to see it in place? Shop the Brass Crystal Tiered Pendant Light →
-
Posted in
Brass, Crystal, Dining Room, Entryway, Indoor Lighting, Pendant Lights




























