bedroom sconce

Cement Hollow Wall Lamp: Modern Grey Sconce for Bedroom & Hallway

  • By LAMPCOZY
  • 7 min read
Cement Hollow Wall Lamp in grey, modern minimalist wall sconce

A cement wall sconce is a wall-mounted fixture with a solid cement body rather than metal, glass, or plaster. This one — the Cement Hollow Wall Lamp in grey — is a hollow, architectural form that throws a soft, warm pool of light against the wall while reading as a quiet sculptural object when switched off. It suits bedrooms, hallways, stairwells, and living areas in contemporary, industrial, and Scandinavian-leaning interiors. It solves a specific problem: most wall lights either disappear into the wall or shout. Cement sits between those poles — visually weighty, tonally neutral, and calm.

If you are shopping for a cement wall sconce and want to know whether this one fits your wall, your wiring, and your room, the notes below cover the practical parts: material behaviour, sizing, bulb choice, mounting height, and where it does and does not belong.

What makes the cement body different

The body is solid cement with a grey finish. That matters for two reasons. First, cement has mass — it looks substantial on the wall and does not visually dissolve the way a slim metal sconce can. Second, the surface is matte and slightly irregular by nature, so it absorbs light instead of reflecting it. The result is a fixture that produces almost no glare from the housing itself; the glow comes from the hollow opening, not from a shiny surface.

The hollow, architectural form is what creates the light-and-shadow interplay. Light escapes through the opening and washes the wall behind and beside the fixture, so the effect is closer to a small wall wash than a spotlight. In a hallway, that reads as depth. In a bedroom, it reads as atmosphere.

Because the finish is cement rather than a painted or plated metal, each piece carries subtle tonal variation. That is a characteristic of the material, not a defect — and it is the main reason cement reads warmer and more tactile than lacquered steel in the same room.

Grey cement hollow wall lamp mounted on a wall, showing the sculptural hollow form

Sizing the fixture to the wall

This lamp is offered in eight sizes, which is the single most useful thing about the range — you can match the sconce to the wall rather than working around one fixed dimension. All are grey cement with the same hollow form.

Size (metric) Size (imperial) Reads best as
D 15 x W 9 x H 25 cm 5.9" x 3.5" x 9.8" Compact accent, bedside, powder room
D 19 x W 9 x H 21.5 cm 7.5" x 3.5" x 8.5" Low, wide accent for hallway runs
D 21.5 x W 9 x H 15 cm 8.5" x 3.5" x 5.9" Wide, short — best on long horizontal walls
D 21.5 x W 10.5 x H 36 cm 8.5" x 4.1" x 14.2" Tall statement piece, stairwell, entry
D 22.5 x W 9 x H 26 cm 8.9" x 3.5" x 10.2" All-purpose bedroom and living room
D 24.5 x W 11.5 x H 28.5 cm 9.6" x 4.5" x 11.2" Larger rooms, high ceilings
D 29.5 x W 11.5 x H 35 cm 11.6" x 4.5" x 13.8" Double-height walls, hospitality
D 31 x W 11 x H 20.5 cm 12.2" x 4.3" x 8.1" Broad wall wash over console or bench

A working rule: the taller the ceiling and the longer the wall, the taller the sconce can be. On a standard 8-foot wall, a fixture in the 8.5" to 11" height range tends to look proportionate. On a stairwell or a double-height entry, the 13.8" to 14.2" sizes hold their own. If you are placing two or more on one wall, size them identically — mismatched heights read as an accident, not a composition.

Close view of the grey cement wall lamp showing surface texture and matte finish

Where to mount it: height, spacing, and layout

These are starting points, not rules — adjust for ceiling height and sightlines.

Hallway and corridor

Centre the fixture at roughly 60 to 66 inches from the floor, measured to the middle of the body. If you are running a sequence down a corridor, space them evenly and keep the gap between fixtures smaller than the distance from the fixture to the nearest doorway. Odd numbers look intentional; two on a long wall usually look like a shortage.

Bedside

For a reading light, mount slightly above mattress height — commonly around 48 to 56 inches from the floor depending on bed height — and roughly 6 to 10 inches out from the edge of the nightstand. Mounting higher turns it into ambient light rather than task light; that is fine, but decide which you want first.

Stairwell

Follow the pitch of the stair on the way up. Hold the fixture at a consistent diagonal distance above the step line rather than a fixed height from each tread — that keeps the eye reading one continuous line instead of a zigzag.

Living room and console

If the sconce sits above a console, bench, or sideboard, aim for 8 to 12 inches of clearance between the top of the furniture and the bottom of the fixture. Closer than that and the light becomes a lamp for the furniture; further and the two elements stop reading as a pair.

Bulbs, voltage, and the light you actually get

The fixture uses G4 bi-pin bulbs on AC 110V. Bulbs are not included, and the lamp is not for 12V low-voltage systems — that distinction matters, because G4 bases are common in both 12V landscape and cabinet lighting and 110V fixtures. Check the bulb you buy is rated for 110–120V line voltage.

  • Colour temperature: around 2700K for the warm, amber-leaning glow that suits cement and wood; 3000K if the room already leans cool or modern.
  • Dimming: dimmability is a property of the bulb and the switch, not the fixture. If you want dimming, pair a compatible dimmable G4 bulb with a compatible dimmer, and confirm compatibility with the bulb maker before you buy.
  • Output: because the hollow form diffuses and spreads light rather than focusing it, a modest output tends to look sufficient. Small G4 LEDs are common and run cool, which suits a housing that has no visible ventilation.
Cement hollow wall lamp lit in a hallway, casting a soft glow on the wall

Installation realities with a cement fixture

Cement is dense, so mounting is the part worth planning rather than improvising.

  1. Check the wall. Drywall alone may not carry the weight comfortably. Locate studs, or plan on appropriate anchors rated for the load, and confirm the substrate can support the fixture.
  2. Confirm the junction box. The fixture needs a 110V supply. If you are replacing an existing wall light, the wiring is usually already in place; if you are adding one, that is an electrician's job in most jurisdictions.
  3. Install with two people if you can. The body is solid cement — holding it in position while aligning a box and driving fasteners is easier with a second pair of hands.
  4. Plan bulb access. Decide how you will reach the G4 socket for future bulb changes before the fixture goes up, especially on a high stairwell wall.

The manufacturer recommends professional installation, and with a cement body that is reasonable advice rather than boilerplate.

Cement vs. metal vs. glass sconces

Cement Metal Glass
Visual weight High — reads as an object Low to medium Low
Surface behaviour Matte, light-absorbing Reflective, can glare Transmissive, bright edges
Best fit Contemporary, industrial, Japandi Traditional and modern both Glam, classic, coastal
Weight on wall Heaviest — plan mounting Moderate Lightest

The trade-off with cement is straightforward: you get quiet texture and zero glare, and you pay for it in mounting effort and a dry-location limitation.

Where it belongs — and where it doesn't

Good fits: bedroom feature walls, bedside pairs, hallway runs, stairwells, entryways, above a console or bench, and hospitality interiors such as boutique hotels, restaurants, and design-forward offices.

Not the right choice: bathrooms and other humid rooms, and outdoor locations. The lamp is designed for dry indoor use. If you need a wet or damp-rated sconce, this is not it — and no amount of sealing changes the rating.

Two cement wall sconces used as bedside lights beside a bed

Specifications

Product type Wall lamp / sconce
Material Cement body
Colour Grey
Bulb base G4 bi-pin
Voltage AC 110V (not for 12V low voltage)
Bulbs included No
Dimensions Eight sizes, from 5.9"H to 14.2"H (see size table above)
Certification UL Certified, ETL Listed, CE Approved, RoHS Compliant, FCC Certified — as stated in the manufacturer listing
Location rating Dry indoor use

Frequently asked questions

What bulb does this cement wall sconce take?

A G4 bi-pin bulb on AC 110V. Bulbs are not included, and the fixture should not be used on 12V low-voltage systems — verify the bulb is line-voltage rated before installing.

Can I put it in a bathroom?

The lamp is designed for dry indoor locations. Cement is durable, but durability is not the same as a damp rating. For bathrooms or anywhere with steam and moisture, consult a professional electrician and choose a fixture rated for that location.

Will it work on any wall?

It is made for standard wall mounting, but because the body is solid cement, the wall must actually carry the load. Use appropriate anchors, locate studs where possible, and confirm the structure can support the fixture. Professional installation is recommended.

Which size should I choose for a hallway?

On a standard 8-foot wall, a fixture roughly 8.5" to 11" tall tends to sit well, centred 60 to 66 inches from the floor. For stairwells and double-height entries, the larger 13.8" and 14.2" sizes hold the space better.

How many should I order?

For a corridor, count the number of bays between doorways and place one fixture per bay, in an odd number where possible. For a bed, order two — symmetrical pairs are the standard treatment for bedside sconces.

Choosing it, or not

Buy this one if you want a wall light that behaves like architecture: matte, quiet, slightly imperfect in the way real cement is, and generous with wall wash rather than sharp with spotlight. Pick a different fixture if you need a damp rating, if your wall cannot take meaningful weight, or if you want the light source itself to be the decoration.

Eight sizes mean you can solve a specific wall instead of compromising on one fixed dimension — which, for a material this assertive, is the difference between a detail that looks considered and one that looks borrowed.

View the Cement Hollow Wall Lamp →

Shop Now — compare sizes and finishes →

The Journal

More Lighting Stories

◆ Black Friday Edit

Tiered Savings

Code COZYBF

Buy 2: 12% OFF (COZYBF12)Buy 3+: 15% OFF (COZYBF15)

Enter code at checkout · Ends Nov 28, 11:59 PM ET

Special instructions for seller
Add A Coupon

What are you looking for?

Trending  Alabaster  Travertine  Brass Chandelier  Kitchen Island Pendant  Wall Sconce  Ceramic Table Lamp  Rattan  Wabi-Sabi  

Popular Products