Gooseneck Wall Sconce Set of 2: Adjustable LED Light for Bedside Reading
A gooseneck wall sconce is a hardwired wall light with a flexible arm you bend to aim the beam. This LAMPCOZY set of two pairs that arm with an integrated LED, so there is no bulb to match, no shade to straighten, and no cord running down the wall. The pair ships together, which is what you want beside a bed, flanking a fireplace, or in any room where a single light would look lopsided.
It is the right fixture if you want directed light without surrendering nightstand or desk space, and if the wall already has a junction box. It is the wrong fixture if you rent and cannot hardwire, or if dimming is non-negotiable — the light is designed for a standard on/off wall switch.
View the gooseneck wall sconce set →
What the adjustable arm actually solves
Most bedside lighting fails for one of two reasons: the lamp sits behind your shoulder so the page falls into shadow, or the shade throws light sideways into the eyes of whoever is trying to sleep. A fixed wall light cannot fix either problem once it is on the wall.
A gooseneck arm can. You bend it once toward the page, the wall, or the floor, and it holds that position. That single adjustment is the difference between a decorative sconce and a light you actually read by.
Because both fixtures in the set are adjustable, a shared room works too: one arm aimed down at a book, the other turned toward the wall for a soft wash of ambient light.
Materials, size, and finish options
The body is metal — a material chosen for rigidity, since an arm that flexes has to hold its shape night after night. Overall dimensions are 35 cm wide by 12 cm high (13.8 in x 4.7 in), a footprint that suits narrow walls beside a bed or between two windows.
Three finishes are offered: black, brushed bronze, and sand nickel. The practical rule is contrast. Black reads as a deliberate line against pale plaster and disappears against dark paint; brushed bronze warms up cool grey and white schemes; sand nickel sits closest to the wall in tone and is the safest choice if you plan to repaint later.
Where it works — and how high to mount it
Mounting height is the detail that decides whether a sconce feels considered or improvised. The numbers below are standard starting points; adjust for ceiling height, mattress thickness, and who is actually sitting there.
Bedside
Set the fixture 48 to 60 inches above the finished floor, or roughly 20 to 24 inches above the top of the mattress. Horizontally, keep each sconce about 12 to 18 inches outside the mattress edge so the arm reaches the pillow without hovering over a face. If you read sitting up, aim for the bottom of the light to land near shoulder height.
Reading chair or home office
For a chair, 36 to 48 inches from the floor puts the beam above a seated reader's shoulder. For a desk, mount it 24 to 36 inches above the work surface and on the side opposite your writing hand, so your own shadow does not fall across the page or keyboard.
Hallway, entry, and living room
Center a single sconce at about 60 to 66 inches from the floor for a human-scale line of light. In a long hallway, repeat them every 8 to 10 feet, or align them with door frames so the repetition reads as architecture rather than decoration. In a living room, a pair flanking a fireplace or artwork works best when both are set at the same height and aimed slightly outward rather than straight ahead.
Spacing the pair
The set is supplied as two matching fixtures, not one — so plan the pair before you cut holes. Measure the wall, mark both centers with a pencil, and check the marks from the doorway you will actually walk through. Symmetry that looks correct from a step ladder can look off from the room's main sightline.
See dimensions and mounting details →
Specifications
| Set | Two matching fixtures |
| Dimensions | W 35 cm x H 12 cm / W 13.8 in x H 4.7 in |
| Material | Metal |
| Light source | Integrated LED (not user-replaceable) |
| Color temperature | 3000K warm, 4000K neutral, 6000K cool |
| Voltage | AC 110-240V |
| Mounting | Wall, hardwired |
| Rating | IP20, indoor use only |
| Finishes | Black, brushed bronze, sand nickel |
| Control | Standard wall switch (not included); not for dimmers |
| Certification | UL, ETL, CE, and SAA listed; RoHS compliant; FCC certified |
Choosing between 3000K, 4000K, and 6000K
Color temperature changes how a room feels more than the fixture's shape does. All three options are offered in this model, and the right pick depends on the hour you use the light most.
- 3000K (warm): The default for bedrooms and living rooms. It keeps skin tones and wood finishes warm, and it is the least disruptive choice if someone else is trying to fall asleep nearby.
- 4000K (neutral): The most neutral task light. Good for a home office, a kitchen-adjacent desk, or a reading chair where you want the page bright without a yellow cast.
- 6000K (cool): Crisp and blue-leaning. Useful for utility spaces, hallways, or detail work — but the least flattering choice in a bedroom, and the most likely to feel clinical in a small room.
One practical note: because the LED is integrated and fixed at the temperature you choose, this is a decision to make before ordering rather than after installation.
Choose your color temperature →
Wiring, switching, and installation
This is a hardwired fixture. It needs a wall junction box with live, neutral, and ground available at the mounting point; there is no plug and no cord cover to hide. If the wall behind the bed has no box, budget for an electrician to add one — that is a wall-opening job, not a weekend one.
The driver is rated AC 110-240V, so the same fixture works on North American 120V circuits and on 220-240V systems elsewhere. Both fixtures in the set wire independently, which means each can be controlled by its own switch if the room is wired that way.
Two limits worth knowing before you buy: the fixture is switched by a standard wall switch and is not designed for dimmer switches, and it carries an IP20 rating, meaning indoor dry locations only — not a bathroom, shower zone, or covered porch.
Gooseneck vs. swing arm vs. plug-in
| Type | Best for | Trade-off |
| Gooseneck (this fixture) | Continuous aiming: reading, desk work, detail tasks | Arm holds a curve; needs hardwiring |
| Swing arm | Reaching over a bed or sofa from a fixed anchor | Larger mechanical footprint; aiming is horizontal, not directional |
| Plug-in sconce | Rentals and walls without a junction box | Visible cord; limited to wherever an outlet sits |
If your wall already has a box and you want the light to point where you look, the gooseneck is the straightforward answer. If you cannot hardwire, the plug-in route is the honest compromise — not a downgrade, just a different constraint.
Frequently asked questions
Can this sconce work as a reading light?
Yes. The adjustable gooseneck arm lets you direct the integrated LED toward a page or a lap, which is exactly the job a fixed wall light cannot do. Mount it at shoulder height beside the chair or bed and bend the arm so the beam lands on the reading surface rather than into the room.
Is the LED replaceable?
No. The light source is an integrated LED module and is not user-replaceable. That is common for slim wall fixtures, and it is the reason the color temperature choice matters at checkout.
Does it work on a dimmer?
No. The fixture is compatible with standard wall switches (switch not included) and is not designed for use with dimmer switches. If dimming is essential, plan for a different fixture rather than adding a dimmer afterward.
Do I need an electrician?
For a typical installation, yes — or at minimum someone comfortable working inside a live circuit's junction box. The fixture is hardwired, so the existing box must be de-energized, the connections made, and the canopy secured to the wall. Where local code requires a licensed electrician, use one.
Can it go in a bathroom?
It is rated IP20 for indoor dry use, so keep it out of damp and wet zones such as above a tub or inside a shower enclosure. A dry vanity wall outside the splash zone is a more reasonable placement, though a higher IP rating is the better choice for bathrooms generally.
A pair that earns its wall space
Wall sconces are usually chosen for how they look and then lived with for how they light. This set is the other way around: the adjustable arm does the work, the metal body and three finishes keep it quiet enough for a bedroom, and the pair means the room is finished in one order instead of two.
Check the wall for a junction box, pick your color temperature deliberately, and mount the pair at the heights above. That is most of the decision.
