Horsehair Wall Sconce: An Iron & Glass Wall Light for Modern Rooms

A horsehair wall sconce is a tall, sculptural wall light that turns an ordinary wall into a focal point. This iron-and-glass fixture takes its cue from the flowing lines of a horse's mane, so it reads as architecture rather than decoration — a vertical silhouette that stays interesting whether the light is on or off. It is made for people who want warm, flattering light (3000K) in a bedroom, living room, dining area, or hospitality space, and who care as much about the fixture's form as its function.

Below you'll find what it is made of, where it works best, how to install and space it, the full specifications, and answers to the most common questions. If you already know it fits your space, you can shop the Horsehair Wall Sconce here.

Design & materials: iron, glass, and a sculptural silhouette

The fixture combines a wrought-iron body with a white glass shade and a tassel detail. The iron gives it structural presence and a crisp outline; the glass softens the glow so the light feels warm rather than harsh. Because the design leans on clean lines instead of ornament, it sits comfortably in both classic and contemporary interiors.

At 18 cm (7.1″) wide and 67 cm (26.4″) tall, it is a vertical piece. It occupies height rather than width, which makes it a natural fit for narrow walls, the strip between two windows, or the space flanking a mirror or a piece of art. Three body finishes are available — Brass, Nickel, and Black — all paired with a white shade. A brass finish warms up cool-toned rooms; black reads more graphic and architectural; nickel stays bright and neutral. View product finishes and pricing.

Where it works best: rooms and placement

Because it is rated IP20 and intended for indoor use only, this sconce belongs in dry, covered interior spaces. The manufacturer lists it as suitable for bedrooms, living rooms, dining rooms, and hotel settings — a good guide to where the tall, warm glow feels most at home.

• Bedrooms: use one on each side of the bed in place of a table lamp to free up nightstand space, or a single sconce as a reading light beside a chair.
• Living rooms: flank a sofa, a fireplace, or a console to add layered light around a seating area.
• Dining rooms: mount a pair on a wall behind the table for soft background light, keeping the fixture out of sightlines across the table.
• Hallways and hotel rooms: its narrow footprint suits corridors and guest rooms where floor space is limited.

If you are pairing two sconces, keep the layout symmetrical so the vertical shapes read as a matched set rather than competing elements. You can shop now and order a matched pair in the same finish.

How to install and space it

This is a hardwired, wall-mounted fixture, so it connects directly to your home's wiring and is operated by a common wall switch (which is not included in the box). It runs on AC 110–240V, which means it is compatible with standard US and international household voltage. Because it is hardwired, plan the installation around an existing junction box or include wiring in any renovation. If you are unsure about your wiring, working with a licensed electrician is the safe choice.

Mounting height and spacing (general guidance):

• For general ambience, set the center of the fixture near eye level — roughly 60–66 inches (about 152–168 cm) from the floor — but adjust to the room. Since this piece is 67 cm tall, that keeps much of the length in comfortable view.
• When using it as a bedside reading light, position it so the shade sits slightly above shoulder height when sitting, so glare stays out of your eyes.
• For a pair, a common starting point is about 24–36 inches (60–90 cm) between fixtures; widen the gap for larger walls and tighten it for narrow ones. Then step back and judge the balance in person.
• If the sconce flanks art or a mirror, keep the fixture's width aligned with the edge of the piece it frames.

Bulb: the fixture takes a G9-base bulb and is compatible with LED or Edison-style options. Pair it with a warm, 3000K bulb to match the warm tone the design is intended to produce. Note that it is designed for use with a standard wall switch and is not specified as dimmable, so if dimming matters to you, confirm compatibility before installing a dimmer.

Specifications

Dimensions may vary slightly due to manual measurement, and color or color temperature can shift a little with photography lighting, monitor displays, and batch differences — all normal for a fixture of this kind. View the full product page for current pricing.

Frequently asked questions

What type of bulb does this wall sconce use?

It is compatible with LED or Edison bulbs that have a G9 base, and it operates on AC 110–240V. It is designed for hardwired installation.

Is it suitable for a bathroom or other damp location?

It carries an IP20 damp rating and is intended for indoor use only. The manufacturer recommends bedroom, living room, dining room, and hotel settings. For very wet or steamy areas such as directly over a shower, it is not the right rating.

Can I use it with a dimmer switch?

The fixture is designed for use with a standard wall switch (not included) and is not specified as dimmable. If dimming is important for your setup, confirm compatibility with a dimmer before installing one.

Can it be mounted outdoors?

No. It is indoor-only and rated IP20, so it should not be exposed to weather or direct moisture.

Do you offer expedited shipping or custom dimensions?

Yes. Expedited shipping is available, and the support team can assist with custom dimensions and lighting layout advice. Reach out to their team for details.

Bring vertical warmth to your walls

If your walls feel flat or your evening lighting is all ceiling glare, a tall, warm fixture like this one changes the mood of a room quickly. The Horsehair Wall Sconce delivers a sculptural iron-and-glass form, a 3000K glow, and three finishes to match your interior — with UL, ETL, CE, and SAA listings for peace of mind.

Shop Now — Horsehair Wall Sconce