Modern Lotus Leaf Flush Mount Ceiling Light: Low-Profile LED Fixture

The lotus leaf flush mount ceiling light is a low-profile, hardwired ceiling fixture built around an integrated LED and an acrylic shade, styled with gently curled leaf edges and finished in a wood-grain tone. It is made for people who want even, glare-friendly light without a hanging pendant blocking the view or eating headroom. If your ceiling is low, your room is small, or you simply want the light source to disappear into the architecture, a flush mount is the right format — and this one adds an organic silhouette to an otherwise plain ceiling.

It suits bedrooms, living rooms, dining rooms, hallways, and hotel spaces, and it comes in six sizes so you can match the fixture to the footprint of the room rather than the other way around.

Design and Materials

The fixture takes its shape from a lotus leaf resting on water. The edges curl gently upward, which gives the flat disc some depth and softens the transition between the light and the ceiling. Even when it is switched off, it reads as a decorative element rather than a utilitarian panel.

Two finish options are offered, both created through hydrographic printing:

• Walnut wood grain — a richer, earthier tone that leans warm and traditional.
• Nature wood grain — a lighter, more neutral timber hue that reads clean and modern.

The body is made from metal and acrylic, and the shade is white, which helps spread light evenly across the room instead of concentrating it in one hot spot.

The light source

The LED is integrated and non-replaceable, so there are no bulbs to buy or swap. That simplifies maintenance, but it also means the fixture should be planned for the long term: once installed, the light module is the light module. The trade-off is energy efficiency and a consistent, stable color output over time.

Choosing the Right Size for Your Room

The most common mistake with flush mounts is buying one that is too small for the space — a tiny disc floating in the middle of a large ceiling. As a rule of thumb, add the length and width of the room in feet, then treat that number as the minimum diameter in inches. A 12 ft × 14 ft living room, for example, points toward a fixture of roughly 26 inches in diameter or larger.

This fixture is available in six sizes:

The two rectangular sizes are useful when a round fixture would feel lost — long living rooms, above a dining table, or in open-plan layouts.

Space, Color Temperature, and Installation Notes

Choosing a color temperature

The fixture is offered in three color temperatures, and the right pick depends on the room and the mood you want:

• 3000K (warm) — best for bedrooms and living rooms, where a relaxed, comfortable feel matters.
• 4000K (neutral) — a good middle ground for kitchens, hallways, and multi-purpose rooms.
• 6000K (cool) — crisper and brighter; well suited to task areas, laundry rooms, and spaces where clarity is the priority.

Installation height and spacing

Because this is a flush mount, it sits close to the ceiling and does not need to be positioned at a pendant height. General guidance:

• Center it in the room wherever possible, so light spreads evenly in all directions.
• In a hallway, keep around 8–10 ft between fixtures so the pools of light overlap slightly — this avoids dark patches between them.
• In bedrooms, a single fixture centered on the ceiling is usually enough; add bedside lamps for layered lighting rather than relying on the ceiling light alone.
• Over a dining table, the rectangular sizes work best when the fixture reflects the table's shape and roughly matches its length.

Wiring and switching

The fixture is hardwired and works on AC 110–240V, so it is compatible with standard North American household wiring. It connects to a common wall switch (not included). Note that it is not dimmable — plan for that if dimming is a priority, and use a standard on/off switch.

Where it can go

With an IP20 rating and a damp-rated design, the manufacturer lists it for indoor use as well as bathrooms, kitchens, and covered outdoor areas. In practice, that makes it a reasonable choice for a bathroom ceiling or a kitchen where a slimmer, decorative fixture is preferred over a tucked-away utility light. As with any fixture, confirm the rating suits the exact conditions of the spot you have in mind.

Specifications at a Glance

Sizes: Ø 30cm × H 4cm, Ø 40cm × H 4cm, Ø 52cm × H 4cm, Ø 72cm × H 4cm, L 100cm × W 60cm × H 6cm, and L 135cm × W 85cm × H 6cm. Dimensions may vary slightly due to manual measurement, and colors or color temperatures may vary slightly between batches and displays.

Is It the Right Fit? A Quick Checklist

• ✅ Your ceiling is standard height and you want light without a hanging pendant.
• ✅ You want a decorative fixture that still looks intentional when the light is off.
• ✅ You prefer an integrated LED with no bulbs to replace.
• ✅ You need a size that can scale from a hallway up to an open-plan room.
• ❌ You need dimming — this fixture is not dimmable.
• ❌ You want a replaceable bulb or an adjustable pendant drop.

Frequently Asked Questions

What are the dimensions of this fixture?

It comes in six sizes: Ø 30cm × H 4cm, Ø 40cm × H 4cm, Ø 52cm × H 4cm, Ø 72cm × H 4cm, L 100cm × W 60cm × H 6cm, and L 135cm × W 85cm × H 6cm. Refer to the size chart images for detailed measurements.

Can I use this fixture in a bathroom?

Yes — it is IP20 damp-rated, which the manufacturer lists as suitable for bathrooms, kitchens, and covered outdoor areas.

Does it work with a dimmer switch?

No. The fixture is not dimmable. It is designed to work with a standard wall switch (not included).

Is the LED bulb replaceable?

No — the LED is integrated and non-replaceable. It is built for energy-efficient, low-maintenance operation.

What color temperatures are available?

Three: warm 3000K, neutral 4000K, and cool 6000K.

Shop the Lotus Leaf Flush Mount

If you want a flush mount that does more than just light a ceiling, this one brings a calm, organic silhouette and two wood-grain finishes to the room. Choose your size and finish to match your space.

Shop Now → Explore sizes and finishes

Compare it against your room dimensions first, confirm the color temperature you want, and check that a standard on/off switch fits your setup. If you need custom dimensions or layout advice, the store's support team can help.

View Product →